Setup RPI-MON5 in Raspbian
Backup any important files before proceeding.
We recommend you do the below commands via a SSH connection so you can copy & paste.
Please make sure you are running latest version of Raspbian Stretch.
Download the installer files
tar -xf lcd.tar.gz
chmod +x install.sh
and run it...
It will install the required files and reboot.
The screen should now be setup and working.
GUI icons overlapping?
Go to Preferences -> Appearance Settings -> Defaults tab.
Now select "Set Defaults" next to "For small screens".
Default calibrations are automatically installed above.
If you need to re-calibrate there is a calibration utility available.
First download and install the calibration utility and requirements.
sudo apt-get update
sudo apt-get install python3 python3-tk python3-numpy
sudo mv calibrate-tft /usr/local/bin/calibrate-tft
sudo chmod +x /usr/local/bin/calibrate-tft
Make sure the screen is displaying the Raspbian GUI and then run the below command.
Follow the prompts to complete the calibration.
Run the below commands to reset the calibration.
sudo rm /usr/share/X11/xorg.conf.d/20-calibration.conf